top of page

W2000

High Power Cleaning for Large Pools and Aquatic Parks

 

The W2000 is equipped with a safety transformer providing 42V to the cleaner for high power operation both on horizontal and vertical surfaces. A timer function enables the operator to delay the start of the cleaner, allowing sediment in the pool to settle, and for the setting of the running time. Rotating brushes release the sediment, moving it towards the powerful pump under the bottom plate of the cleaner. Sediment is either collected in filter bags or passed through a discharge hose to the main pool filters or effluent waste.

 

 

Standard Equipment:

  • W2000 cleaning unit

  • Trolley with built-in safety transformer

  • 120-micron filter bag

  • Double rotating brushes

  • 10m power supply cable

  • 25m cable for remote control

  • 40m floating umbilical cable

 

Optional Equipment:

  • Radio remote control / timer

  • 200-micron or 70-micron filter bags

  • 2" discharge hose connection

  • Fixed, spring-loaded brush (algae brush)

  • Free stream impeller

  • 40-60m floating umbilical cable

 

 

 

Technical Data:

 

Weight in air: approx. 49 kg
Weight in water: approx. 5 kg
Dimensions (LxWxH): 86 x 60 x 70 cm
Suction width: 60cm
Suction capacity: 1200 liters/minute
Variable speed in manual mode: 0,2 and 0,4 meters/second
Speed in automatic mode: 0,2 meters/second
Mains voltage 3-phase, 50/60Hz: 205/230/400 V
Operating voltage: 42 V
Max. power output: 2,5kW

bottom of page